8 Types Of Air Conditioning Systems

The central air conditioners installed in your home range from units from 1.5 tons to 5 tons. Of all the different types of air conditioners, this is the most common type of cooling system, as it prefers larger houses because of its ability to cool efficiently. Central air conditioners circulate cold air through supply and return channels.

You can control the temperature of an entire house or only one room by operating the air traffic controllers in each specific area. This provides more control and a more efficient way to control the temperature and operating costs of the distributed mini-air conditioning without channels. Like window air conditioners, air conditioners produce hot air through the wall, which then runs out, while cold air is sent into the room.

SEER is the seasonal cooling production in Btu divided by the seasonal energy input in watt hours for an “average” climate in the US. USA Before 1992, several statistics were used, but the performance of many older central air conditioners was equal to SEER classifications of only 6 or 7. The average central air conditioning sold in 1988 had a SEER equivalent of about 9; in 2002 it had risen to 11.1. A central air conditioning combines the evaporator, condenser and compressor into a single unit placed on a concrete roof or plate near the foundation. When placing units on the roof, ensure that you recruit a full team of qualified contractors, including a rooftop specialist. From the unit, the channels passing through the outer wall or ceiling draw air from the house and return cooled air inwards.

This means that portable air conditioners, like window units, have all their important components in a device. Central air conditioning of the distributed system: for this type of system there are two separate cabinets. One is located commercial air conditioner outside in a metal cabinet and houses the capacitor and compressor. Usually the inner box contains an oven or part of a heat pump, on which the evaporation coils are installed in the main supply channel of the heat pump or oven.

If you want to build it on the wall, the wall should not be thicker than 9 ”. Thick walls generally prevent airflow and the AC unit of the window becomes energy-inefficient compared to other types of AC units You need an air conditioner that has the output capacity to cool the entire house for which it is intended.

When it comes to air conditioning maintenance, you only have to worry about cleaning one device. A large warehouse, gallery or shopping center needs central air conditioning so that everything has air conditioning. Within a central air conditioning system, there is a large compressor that can produce hundreds of tons of cold air. If the air conditioning is to be in each room, for example if you own a hotel, separate units are installed in each room. For central air conditioning to work efficiently, your HVAC technician must perform a load calculation on your home to determine the correct size of the system to be installed. Make sure that this step is not overlooked when installing a central air conditioning.

These systems require regular and intensive cleaning and maintenance, which is important to keep up to date because the cost of total repairs and replacements is expensive. The system consists of two parts; A wall-mounted inner unit and an external component. The inner unit absorbs hot air from the room and cools it before blowing fresh air into the room. On the other hand, the outer unit first cools the coolant before it is transported to the inner secondary units. The two units are connected by electrical cables and metal pipes that carry the coolant.

Floor-mounted air conditioners are designed for convenience if you want something similar to a mini split, but it lacks the space needed for a wall-mounted unit. The inner unit of this type AC is held on the ground, installing the outer unit without preparing pipes. The difference is that it is an independent unit and can therefore be mobile to convenience. It takes nothing more than an electrical outlet to turn it on and access a window from which the exhaust air can run out. Window air conditioners are available in different sizes that can be selected based on the need and size of the room.

Like all air conditioners, PTACs send coolants through an air cooling compressor, which is then diverted to the cooled chamber. However, unlike central air conditioning, PTAC systems have no channels, making installation considerably cheaper than central air systems. Compared to central systems, PTACs are not too difficult to install and also cost less in advance. Ductless mini divisions come with a remote control associated with a smart AC controller, which means you can control them with your phone too. The low price is one of the reasons many people opt for a window conditioning system.